Download Meizu M3E Stock Rom Firmware (Flash File)

Are you searching for the stock ROM firmware of your device Meizu M3E? If sure your reply, you might be on the correct web page. We now have given the direct link to download Meizu M3E firmware.

Download Meizu M3E stock ROM from right here, flash it in your device and benefit from the native Android expertise once more. The download file contains the USB driver and the firmware file.

Download Meizu M3E Firmware

Download Meizu M3E Firmware

Stock ROM File Name: Meizu_M3E_5.2.5.0G_OTA.zip
Stock ROM File Size: 913 MB
Android OS Version: 5.0

Download Now

Stock ROM File Name: Meizu_M3E_6.1.0.0G_OTA.zip
Stock ROM File Size: 941 MB
Android OS Version: 6.0

Download Now

How To Flash Stock ROM Firmware On Meizu M3E

Step 1: To get began, download Meizu M3E USB driver and set up it in your computer. As soon as accomplished, download the firmware zip file from right here and put it aside in your desktop.

Step 2: Now rename the firmware zip file to “Replace.zip“.

Update Zip

Step 3: Next, allow USB debugging mode in your device by following this path: Settings -> Developer Choices -> USB Debugging. If developer possibility just isn’t seen in your device, allow it by following this path: Settings -> About Cellphone -> Construct Quantity (faucet on it for 5-7 occasions to allow Developer Choices).

Enable USB Debugging

Step 4: Now join your Meizu M3E device to the computer utilizing the unique USB knowledge cable and switch the “Replace.zip” file from Step 2 to the SD card of your device.

Step 5: As soon as the firmware file is successfully transferred to your device, unplug it out of your computer.

Step 6: Now switch off your device and boot it into the restoration mode by urgent and holding the Quantity Up and Energy Buttons concurrently. As soon as your device is within the restoration mode, choose “wipe cache partition“.

wipe cache partition

Step 7: Next, choose “replace / restoration from SD Card” possibility.

Update Recover From SD Card

Step 8: Now click on on “Replace.zip” in your SD card to launch the firmware flashing process.

Firmware Flashing Via Recovery

Step 9: It should take a minute or two for the flashing process to get accomplished and as soon as it does, choose “reboot system now” possibility.

reboot system now

That’s it. Now you might have successfully flashed firmware on Meizu M3E device. If you happen to encounter any points whereas following this tutorial, do let me know through feedback.

The submit Meizu M3E Firmware appeared first on Android Stock ROM.

You May Also Like